Quality isn't a feature. It's the foundation.
Every machine we run is selected, tested, calibrated and continuously monitored, so the hundredth part matches the first.
Real machines. Running right now.
One section of our working farm: H2C, X2D and X1C machines on the top shelf, P1S production units below, with AMS units, dryers and filament stock within reach. Every machine is numbered and tracked.
The machines behind every part.
| Tier | Equipment | Build volume | Materials | Best for |
|---|---|---|---|---|
| Production farm | 10 × Bambu Lab P1S AMS-equipped · up to 24 colors (AMS 2) | 256 × 256 × 256 mm | PLA · PETG · ABS · ASA · TPU · PA · PC · PLA-CF | Production runs, consumer products, multi-color, fast turnaround |
| Large format · H2C | 1 × Bambu Lab H2C Vortek hot-end swapping · dual nozzle | 330 × 320 × 325 mm total Single nozzle: 325 × 320 × 320 mm | PA-CF · PLA-CF · ABS · ASA · PETG · TPU · PC · PA | Our largest FDM parts, multi-material builds, engineering validation |
| Engineering · X2D | 2 × Bambu Lab X2D AMS 2 | 256 × 256 × 260 mm | PA-CF · PLA-CF · ABS · PETG · TPU · PC · PA | Precision B2B parts, high-detail prototypes |
| Engineering · X1C | 1 × Bambu Lab X1C AMS · auto-calibrated | 256 × 256 × 256 mm | PA-CF · PLA-CF · ABS · PETG · TPU · PC · PA | Engineering validation, carbon-fiber nylon parts, detailed prototypes |
| Multi-tool · Snapmaker U1 | 1 × Snapmaker U1 (newest) 4-toolhead tool-changer · CoreXY | 270 × 270 × 270 mm | PLA · PETG · ABS · ASA · TPU · CF/GF composites | Multi-color and multi-material parts with minimal purge waste |
| Multi-tool · Creator 5 | 2 × Flashforge Creator 5 4-toolhead tool-changer | 256 × 256 × 256 mm | PLA · PETG · ABS · ASA · TPU · composites | Multi-color and multi-material parts with minimal purge waste |
| Resin · Sonic Mega 8K | 2 × Phrozen Sonic Mega 8K 15″ 8K LCD · 43 µm XY | 330 × 185 × 400 mm | Standard · ABS-like · castable · flexible resin | Large high-detail parts, props, tall models |
| Resin · Photon P1 Max | 1 × Anycubic Photon P1 Max (new) 14″ 12K LCD · heated 1.9 L vat | 285.5 × 214 × 300 mm (18.3 L) | Standard · ABS-like · high-viscosity resin | Large detailed parts, batch production of small parts |
| Resin · Photon | 1 × Anycubic Photon (original) 5.5″ 2K LCD · 47 µm XY | 115 × 65 × 155 mm | Standard · castable resin | Jewelry, miniatures, small fine-detail parts |
| Open-bed FDM | Creality Ender 5 S1 | 220 × 220 × 280 mm | PLA · PETG · TPU | Large flat parts, overflow capacity |
| Laser | xTool M2 20W color craft laser Enclosed · riser · CMYK inkjet print module · RA3 Lite rotary xTool smoke purifier / fume extractor, 3-layer filtration | Flat & cylindrical | Wood · acrylic · leather · cardstock · slate · coated & anodized metal (engraving) | Engraving, cutting, full-color printing, branded products, tumblers |
| Material drying | Sunlu / Inslogic IQ 10 dehumidifying machines Sunlu S4 drying units · 3 kg SP2 drying units Bambu Lab AMS, AMS 2 & AMS HT units with heating Elegoo H1 HT filament dryers (up to 85°C) | — | All filaments, including moisture-sensitive PA, PC and TPU | Dry filament before and during every print, for stronger layers and accurate dimensions |
| Post-processing | Multiple Phrozen wash & cure stations Multiple high-end ultrasonic cleaning stations | — | Resin parts, fine-detail cleaning | Clean, fully cured resin parts; precision cleaning before finishing |
Five checkpoints on every job.
The same level of attention whatever the size, complexity or volume of the job.
Material verification
Lot tracking, moisture control and professional drying before printing.
Machine calibration
Calibration tracked per machine. Validated before entering production.
In-process monitoring
Long-duration prints are monitored, and defects are caught early.
Dimensional inspection
Tolerance validation and fitment testing on B2B parts.
Batch documentation
Batch consistency is recorded, so reorders match the original run.
Failures happen in every print farm. Ours get caught here, not in your box.
When a part lets go of the plate mid-print, the printer keeps extruding into open air and makes "spaghetti." Every 3D printing shop sees it. What matters is that it's caught, the cause is fixed, and the job is reprinted before anything ships.
We fix our own machines.
Fans, hotends, wiring and sensors are serviced in-house, so a worn part doesn't turn into a bad print, or a week of downtime waiting on repairs.
Engineered for repeatability.
Precision & accuracy
Calibrated motion systems and validated profiles for each material and machine tier.
Scalable capacity
Many machines run in sync, so the farm moves from one prototype to a full run without retooling.
Long-duration reliability
Maintenance schedules and monitoring keep multi-day prints running reliably.
In-house testing lab
Materials and process settings are tested for real-world performance before production.
Consistent surface quality
Tuned profiles and dried material give clean, consistent surfaces from part to part.
Defect inspection
Every part is inspected against defect protocols before it's packed.
Your IP stays yours.
Many of our projects involve proprietary designs, intellectual property and sensitive product development. We hold every file to strict confidentiality standards and offer NDA-protected development whenever it's needed.
What you share with NexForge stays with NexForge.
Our commitments
- Secure handling of project files
- Confidential manufacturing processes
- Protection of intellectual property
- NDA available on request
- Private-label & white-label production
- Professional discretion at every stage
Put our standards to work.
Send a part that has to be right, and we'll show you what consistent means.